Shanghai Shenlu Homogenizer Co., Ltd. is a domestic joint venture with fixed net assets of more than 0.2 billion yuan. Its address is close to Shanghai F1 International Circuit and the transportation is very convenient. The company has introduced a full set of high-tech talents and management personnel of China's first 60Mpa high-pressure homogenizer. Following 20 years of rich experience in research and development, they have completed breakthroughs in the structure, material and technology of the homogenizer. The Shenlu homogenizer created is the second generation, with a high starting point and high quality reputation at home and abroad. It has been selected by China's famous super-large users as the preferred batch machine for technological transformation and expansion, exported to Europe, America, Africa and Southeast Asian countries. The advantages of Shenlu homogenizer in the same competition are as follows:
The 1. flow is sufficient, and the flow indicated on the nameplate is only more or less. Technically, the pressure rise flow rate is guaranteed unchanged.
2. grinding particle size is good, Φ0.01-2 microns. (Appropriate pressure selection)
The 3. pressure is stable, and the pointer swing of the pressure gauge is within 1Mpa, that is, P swing ≦ 1Mpa. The check valve is durable and reliable to ensure stable pressure and sufficient flow.
The 4. noise is low, the transmission gear of this machine is installed on the crank arm, symmetrical transmission, small bending moment, and good balance; the shaft end is a rolling bearing, and the bearing bush is made of special alloy material, which becomes harder and harder as it runs, and the transmission sound is lower than the motor sound.
The 5. seal is reliable and does not leak slurry. Plunger seal, using the fourth generation of square self-sealing ring X4310, wear-resistant and efficient, high temperature up to 150 ℃; gland using radial seal, the advantages of increasing pressure and sealing effect.
6. wearing parts have long service life, strong acid and alkali resistance (NaOH, HNO3 ≤ 5%), suitable for CIP disinfection. Especially dairy production with secondary sterilization, foolproof. The one-way valve and plunger are made of special hard materials, durable, and all kinds of seals are made of special materials, so do not replace them frequently.
7. material saving, homogeneous valve, check valve solid solid material, can be repeatedly grinding use, if skilled use of the material cost is only 1/5-1/12 of the first generation of homogenizer.
8. oil saving, the transmission of this machine adopts splash lubrication, oil change once every 750 hours during the first run, and oil change once a year in three shifts for the second time.
9. disassembly and maintenance is convenient, and the operation and maintenance of employees are worry-free and labor-saving.
10. appearance meets international health requirements.