1, the horizontal movement of the plunger structure, and the plunger vertical (up and down) movement of the experimental machine, the plunger can spray cooling water, thereby extending the life of the plunger seal.
2. The material will not enter the E-mail after leakage, and will not pollute the external working environment.
3. The lubricating oil in the transmission box can effectively lubricate the connecting rod, crosshead, etc., and there is no troublesome work that traditional equipment needs to be added with grease before starting each time.
4, the overall shape of the cube, stainless steel cover, beautiful and easy to operate.
5, only 1 liter of material can do the experiment when working.

Automatic Homogenizer
1. Remote control can be implemented: the homogenizer is equipped with an electrical control cabinet, which is used to receive the signal of the previous process and control the operation of the homogenizer, as well as the rise and fall of the homogenizer pressure.
2, there is a cooling water protection device, when the cooling water pipe is cut off, the equipment will stop immediately, play a protective role.
3. Pre-set the pressure required for the first and second levels of homogenization, and automatically increase to the good pressure of the equipment after starting the equipment.
4. There is an emergency stop button on the electric control cabinet, which is used for manual emergency stop in case of emergency.
5, safe to avoid misoperation of the operator, to a large extent, improve the use of equipment.

NGH horizontal high pressure homogenizer

Appearance:
1, the use of fully enclosed stainless steel shape, safety, health, beautiful.
2. The outer cover adopts modular modeling, which can realize rapid assembly and disassembly and facilitate maintenance and maintenance.

Transmission part:
1. The lubrication of the transmission part adopts a combination of splash lubrication and forced pressure lubrication, which greatly improves the safety and reliability.
2. The crankshaft is made of alloy steel forgings, which has super strength and life.
3. Hard tooth surface external gear box design, reliable performance, simple maintenance.
4. Equipped with a separate forced cooling system to ensure the operation requirements of the system oil temperature, which can meet the long-term stable operation of the equipment.

Hydraulic end section:
1. The structural design, strength and life of the integral pump body are reliably guaranteed.
2, express assembly and disassembly valve core, valve seat design, assembly and disassembly party.
3. The valve seat adopts double-sided design with double service life.
4. Use sanitary pressure diaphragm table to display pressure

GHH High Pressure Homogenizer

Appearance:
1, the use of fully enclosed stainless steel shape, safety, health, beautiful.
2. The outer cover adopts modular modeling, which can realize rapid assembly and disassembly and facilitate maintenance and maintenance.

Transmission part:
1. The lubrication of the transmission part adopts a combination of splash lubrication and forced pressure lubrication, which greatly improves the safety and reliability.
2. The crankshaft is made of alloy steel forgings, which has super strength and life.
3. Hard tooth surface external gear box design, reliable performance, simple maintenance.
4. Equipped with a separate forced cooling system to ensure the operation requirements of the system oil temperature, which can meet the long-term stable operation of the equipment.

Hydraulic end section:
1. The structural design, strength and life of the integral pump body are reliably guaranteed.
2, express assembly and disassembly valve core, valve seat design, assembly and disassembly party.
3. The valve seat adopts double-sided design with double service life.
4. The sanitary pressure diaphragm gauge is used to display the pressure, and the reliable performance comes from the world brand pressure gauge manufacturer.