Automatic HomogenizerManufacturers believe that the high-pressure homogenizer can be divided into vertical integrated homogenizer and horizontal combined homogenizer according to the structure. The former is generally suitable for small and medium-sized equipment (power below 45kw); the latter is suitable for large equipment (power above 45kw). At present, most domestic manufacturers produce vertical one homogenizer. This model has compact structure, beautiful appearance and small footprint. But for large equipment, stability becomes a major issue. The so-called horizontal combination homogenizer refers to the motor, gearbox, crankcase, lubrication station, etc. It is a relatively independent block, distributed on the same horizontal plane, connected into a whole by belt (wheel), coupling, oil pipe, etc. The whole machine has low center of gravity, stable operation and convenient maintenance.

Fully automatic homogenizer manufacturers believe that the high-pressure homogenizer is divided into ordinary homogenizer and low-speed homogenizer according to the reciprocating times per minute of the plunger. The speed of the crankshaft of the homogenizer (that is, the reciprocating frequency of the plunger is determined year by year) is one of the key factors that determine the performance of the whole machine. In the case of the same material, processing accuracy and structure, the lower the speed within a certain range, the greater the degree of wear of each friction pair (such as shaft and bush, plunger and seal, etc.).) And the damage degree of each stressed part (such as valve core, valve seat, etc.) in the pump body.) The time will be greatly reduced, and the stability of equipment operation will be greatly improved. So this series is particularly suitable for long-term use.

　　Automatic HomogenizerManufacturers believe that high-pressure homogenizers can be divided into manual control, manual hydraulic control and automatic hydraulic control. At present, the market is dominated by manual control. If the entire production line is automatically controlled, you can choose a fully automatic control homogenizer.

Fully automatic homogenizer manufacturers believe that high-pressure homogenizers can be divided into upstream homogenizers and downstream homogenizers according to the position of the homogenizer on the production line. Generally, the homogenizer used before sterilization is called the upstream homogenizer, and the homogenizer used after sterilization is called the downstream homogenizer. Generally, a general-purpose homogenizer can be used for the former, and an aseptic homogenizer is used for the latter. The so-called aseptic homogenizer is to use steam (or superheated water) to isolate the dynamic seal leakage point at the plunger of the homogenizer and the static seal leakage point at the inlet and outlet from the atmosphere. This homogenizer can be used as a sterile device after sterilization.

　　Automatic HomogenizerManufacturers believe that the advantages of high pressure homogenizer:

1. The high-pressure homogenizer is easy to operate and maintain in design; distilled water, pure water and detergent can be used for cyclic cleaning (do not open the pressure switch at this time), or the pump head can be disassembled for manual cleaning.

2. The start/stop control of the machine is located on the side of the machine, easy to operate, and can be used for emergency switch. It also includes thermo-magnetic protection of the main motor.

3. The high-pressure homogenizer is equipped with a polished stainless steel shell, which is detachable for easy inspection and maintenance. Its base stands on four rubber pads.

4. The machine by weight and self-priming feed, do not need any feed pump. Only power is required, no other facilities (such as water or compressed air) are required.

5. According to the requirements of the sample, use gaskets of different materials; the standard gasket material is special plastic. The plunger is sealed with a special Teflon material and comes with water lubrication.

The above is the full automatic homogenizer manufacturers to share the content.